- Reaches 1200°C maximum temperature

- Heavy-duty firebrick insulation surrounds the opening for added durability

- Adjustable alarm or Over-temperature Protection (OTP) setting can be used to protect the furnace or loaded chamber from excessive heat

- Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition

- Counter-weighted door swings upward, directing heat away from operator

- Four individual embedded elements in special refractory cement permit excellent heat distribution in the chamber

- Door safety switch protects operator by removing power to the heating elements upon opening the door

- Rear-mounted 0.38in. (0.95cm) diameter port for monitoring chamber temperatures with independent measuring devices

- LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F

  (programmable models only)

Temperature controller options

Single-setpoint Controller (B1)

- Single display shows actual temperature or setpoint

​8-step Programmable Controller (C1)

- Ramps to vary heat-up rate and dwell cycles to hold temperature at set levels from 0.1 to 999.9 minutes

- [Holdback] feature [holds] program until furnace temperature heats up or cools down to preprogrammed parameters — program will never outrun furnace performance